| |
|
Advantages
of Electric Tracers |
|
- Maintains freeze protection,
close temperature tolerances or viscosity control.
- Excellent for maintaining long,
continuous lengths of impulse lines and piping at consistent
temperatures.
- Good for situations where steam
is not available or steam supply could be interrupted, such as
during shutdowns.
|
|
O'Brien
TRACEPAK Electric Traced Bundle Advantages: |
|
- Complete design package - we'll
provide engineering support and failure mode analysis, plus we'll
recommend accessories that may be required and whether a
thermostat will be needed.
- Materials - chloride-free
urethane jacket, self regulating and constant watt cables as
well as mineral insulated and resistance wire tracers, heat
shrink boots and nonhygroscopic insulation provide you with
the highest quality materials for a superior package.
- Availability of materials -
In-stock seamless stainless steel and Monel allow us to
respond fast to your quick delivery requirements.
- Tracers are approved for use in
hazardous areas and rated by FM, CSA, and to CENELEC
standards.
|
|
TRACEPAK
TPE
Pre-insulated tubing bundle with
self-regulating electric tracing |
|
 |
For the
closest control of your process, use TRACEPAK TPE. It's excellent
for maintaining long, continuous lengths of impulse lines and
piping at constant temperatures. Use TPE when steam isn't
available or when its supply could be interrupted such as during
shutdowns. Perfect for freeze protection, close temperature
tolerances, or viscosity control. |
|
TPE1 |
|
|
- Available with one or two 1/4-,
3/8- or 1/2-inch process lines with a high or low temperature
self-regulating tracer.
- Tube materials available: welded
316 stainless steel, seamless 316 stainless steel, copper, PFA
Teflon, and seamless Monel 400.
|
|
TPE2 |
|
Tracers
Available:: |
|
- High temperature,
self-regulating XTV tracer maintains temperatures to 250ºF
(121ºC) and withstands blowdown temperatures to 420ºF (215ºC).
- Low temperature, self-regulating
BTV tracer maintains temperatures to 150ºF (65ºC) and
withstands blowdown temperatures to 185ºF (85ºC).
- Tracers are FM approved and CSA
certified for use in hazardous areas when used with the
recommended power connection kits.
|
|
O'Brien chooses from a
variety of available electric tracers to design and produce a
bundle that meets the operating conditions and approvals required.
Select the tracer from a wide array of types to meet your needs:
|
|
Self limiting
tracer cable: |
|
Cut to length
Most applications do not require temperature control
FM, CSA and CENELEC |
|
Low
Temperature: |
High
Temperature: |
- Up to 10 w/ft
- Maintain temperatures up to
150ºF (65ºC)
- Exposure temperatures up to
185ºF (85ºC)
|
- Up to 20 w/ft
- Maintain temperatures up to
300ºF (149ºC)
- Exposure temperatures up to
420ºF (216ºC)
|
|
Constant
wattage tracer cable: |
|
Cut to length only
at desecrate nodes
Requires temperature control
FM, CSA and CENELEC |
|
Low
Temperature: |
High
Temperature: |
- Maintain temperatures up to
200ºF (93ºC)
- Exposure temperatures up to
400ºF (204ºC)
|
- Maintain temperatures up to
300ºF (149ºC)
- Exposure temperatures up to
450ºF (232ºC)
|
|
Mineral
Insulated tracer: |
|
Factory finished
length may not be cut to length in the field
Requires temperature control
FM, CSA and CENELEC
Up to 40 w/ft
Maintain temperatures up to 600ºF (315ºC)
Exposure temperatures up to 1000ºF (538ºC) |
|
Resistance Wire
tracer: |
|
Field cut within
predefined limits
Requires temperature control
CENELEC
Up to 40 w/ft
Maintain temperatures up to 400ºF (204ºC)
Exposure temperatures up to 450ºF (232ºC) |
Request
performance and pricing information for a bundle.
INSTRUMENT
ENCLOSURES | TUBING
BUNDLES | INSTRUMENT
SUPPORTS
SALES
OFFICES | OEM/CUSTOM
MANUFACTURING | MORE
INFO | ABOUT
O'BRIEN | HOME
|
Integrated Solutions Improving Process Accuracy
|
|