| |
|
Advantages of Steam Tracers |
|
- Steam tracing is used for
analyzers and instrument impulse lines.
- Light tracing is generally used to
provide freeze protection for instrument impulse lines and
process lines for analyzers. Provides protection over a longer
length than than heavy traced designs.
- Heavy tracing keeps the process
tubing in direct contact with the tracer, and maintains higher
process temperatures. It is used to provide process
temperature maintenance for impulse lines for instrumentation,
process lines for analyzers, sampling, additives and other
small process lines.
- Heavy tracing maintains close
temperature profiles through seasonal ambient temperature
changes.
- Maintains consistent process
temperature over a wide ambient temperature range.
|
|
O'Brien's
TRACEPAK's Steam Traced Bundle Advantages: |
|
- Thermal Design Analysis provides
information specific to your application. We'll design
specialized bundles to meet your requirements.
- TRACEPAK's urethane jacket allows
installation at lower temperatures.
- Ease of installation. Heat shrink
end seal boots and parallel construction make TRACEPAK easier
and quicker to install.
|
|
TRACEPAK
TPL
Pre-insulated tubing bundle with light
steam tracing |
|
|
When you need to maintain
temperatures between 50fF (10fC) and 200fF (93fC), or maintain
protection over a longer length, TRACEPAK TPL is the answer. Best
used for small diameter process lines for sampling and additives,
freeze protection of instrument impulse lines, or process lines
for analyzers. |
|
- Available with one or two 1/4-,
3/8- or 1/2-inch process lines with a 1/4-, 3/8-, or 1/2-inch
steam tracer.
- Tube materials available: welded
316 stainless steel, seamless 316 stainless steel, copper, PFA
Teflon, and seamless Monel 400.
- Tracer material available: welded
316 stainless steel, seamless 316 stainless steel, copper, and
seamless Monel 400.
- TPU jacket, UV resistant. Black
standard, other colors available
|
|
TRACEPAK TPH
Pre-insulated tubing bundle with heavy
steam tracing |
|
|
Look to TRACEPAK TPH when
you need to maintain high process temperatures. Because the
process tubing is in direct contact with the tracer, you'll
maintain higher temperatures more efficiently. Excellent for
viscosity control, instrument impulse lines, process lines for
analyzers, sampling, additives and other small process lines. |
|
- Available with one or two 1/4-,
3/8- or 1/2-inch process lines with a 1/4-, 3/8-, or 1/2-inch
steam tracer.
- Tube materials available: welded
316 stainless steel, seamless 316 stainless steel, copper, PFA
Teflon, and seamless Monel 400.
- Tracer material available: welded
316 stainless steel, seamless 316 stainless steel, copper, and
seamless Monel 400.
|
Request
performance and pricing information for a bundle.
INSTRUMENT
ENCLOSURES | TUBING
BUNDLES | INSTRUMENT
SUPPORTS
SALES
OFFICES | OEM/CUSTOM
MANUFACTURING | MORE
INFO | ABOUT
O'BRIEN | HOME
|
Integrated Solutions Improving Process Accuracy
|
|